Key points are not available for this paper at this time.
Abstract In the past two decades, mechanical energy harvesting technologies have been developed in various ways to support or power small‐scale electronics. Nevertheless, the strategy for enhancing current and charge performance of flexible piezoelectric energy harvesters using a simple and cost‐effective process is still a challenging issue. Herein, a 1D–3D (1‐3) fully piezoelectric nanocomposite is developed using perovskite BaTiO 3 (BT) nanowire (NW)‐employed poly(vinylidene fluoride‐ co ‐trifluoroethylene) (P(VDF‐TrFE)) for a high‐performance hybrid nanocomposite generator (hNCG) device. The harvested output of the flexible hNCG reaches up to ≈14 V and ≈4 µA, which is higher than the current levels of even previous piezoceramic film‐based flexible energy harvesters. Finite element analysis method simulations study that the outstanding performance of hNCG devices attributes to not only the piezoelectric synergy of well‐controlled BT NWs and within P(VDF‐TrFE) matrix, but also the effective stress transferability of piezopolymer. As a proof of concept, the flexible hNCG is directly attached to a hand to scavenge energy using a human motion in various biomechanical frequencies for self‐powered wearable patch device applications. This research can pave the way for a new approach to high‐performance wearable and biocompatible self‐sufficient electronics.
Jeong et al. (Sat,) studied this question.