Key points are not available for this paper at this time.
Abstract Solid‐oxide Li + electrolytes of a rechargeable cell are generally sensitive to moisture in the air as H + exchanges for the mobile Li + of the electrolyte and forms insulating surface phases at the electrolyte interfaces and in the grain boundaries of a polycrystalline membrane. These surface phases dominate the total interfacial resistance of a conventional rechargeable cell with a solid–electrolyte separator. We report a new perovskite Li + solid electrolyte, Li 0.38 Sr 0.44 Ta 0.7 Hf 0.3 O 2.95 F 0.05 , with a lithium‐ion conductivity of σ Li =4.8×10 −4 S cm −1 at 25 °C that does not react with water having 3≤pH≤14. The solid electrolyte with a thin Li + ‐conducting polymer on its surface to prevent reduction of Ta 5+ is wet by metallic lithium and provides low‐impedance dendrite‐free plating/stripping of a lithium anode. It is also stable upon contact with a composite polymer cathode. With this solid electrolyte, we demonstrate excellent cycling performance of an all‐solid‐state Li/LiFePO 4 cell, a Li‐S cell with a polymer‐gel cathode, and a supercapacitor.
Li et al. (Mon,) studied this question.