Key points are not available for this paper at this time.
Resistance spot weldability of martensitic stainless steels is impaired by the formation of brittle martensite in the fusion zone (FZ). In this paper, in situ rapid tempering via applying a second pulse current after a first melting/solidification pulse during resistance spot welding of AISI 420 martensitic stainless steel sheets was used as a pathway to enhance the toughness of the FZ. By using proper second pulse conditions, the FZ with reduced hardness can be generated which is featured by a decomposed martensitic structure with nano-sized carbide precipitations. The improved toughness as a consequence of this modified microstructure resulted in remarkable enhancement of the peak load and energy absorption of the spot welds compared to the single-pulse welds.
Pouranvari et al. (Mon,) studied this question.