Key points are not available for this paper at this time.
Abstract Due to their high thermal stability and low cost, molten chlorides are promising high-temperature fluids for example for thermal energy storage (TES) and heat transfer fluid (HTF) materials in concentrated solar power (CSP) plants and other applications. However, the commercial application of molten chlorides is strongly limited due to their strong corrosivity against commercial alloys at high temperatures. The work addresses on a fundamental level whether carbon based composite ceramics could be potentially utilized for some corrosion critical components. Liquid silicon infiltration (LSI) based carbon fiber reinforced silicon carbide (called C/C–SiC) composite is immersed in a molten chloride salt (MgCl 2 /NaCl/KCl 60/20/20 mole%) at 700 °C for 500 h under argon atmosphere. The material properties and microstructure of the C/C–SiC composite with and without exposure in the molten chloride salt have been investigated through mechanical testing and analysis with scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) scanning. The results reveal that the C/C–SiC composite maintains its mechanical properties after exposure in the strongly corrosive molten chloride salt. The oxidizing impurities in the molten salt react only with residual elemental silicon (Si) in the area of the C/C–SiC matrix. In comparison, no indication of reaction between the molten chloride salt and carbon fiber or SiC in the matrix is observed. In conclusion, the investigated C/C–SiC composite has a sound application potential as a structural material for high-temperature TES and HTF with molten chlorides due to its excellent corrosion resistance and favorable mechanical properties at high temperatures.
Ding et al. (Thu,) studied this question.