Key points are not available for this paper at this time.
The tests included the determination of the reinforcement effectiveness of old larch timber originating from a building built in 1860 with the use of carbon-fibre and aramid-fibre mats and strips, BFRPs and GFRPs. The test results showed that in old solid timber pieces from European larch (Larix decidua Mill.), the highest mean flexural bending capacity occurred in samples reinforced with carbon-fibre mats (increase in flexural bending capacity was 60.66% in relation to non-reinforced elements), while the lowest flexural bending capacity of the tested components occurred with reinforcement with GFRP (10 mm in diameter) (increase by only 19.04% in relation to non-reinforced elements). Additionally, bending tests of repaired 130-year-old pine (Pinus sylvestris L.) beams were shown (real-size scale) using CFRP strips and mats. The problems associated with the delamination of the CFRP strip due to uneven deformation of the damaged timber surface and the effectiveness of these repairs are also shown.
Brol et al. (Fri,) studied this question.