Key points are not available for this paper at this time.
Tomographic synthetic aperture radar (TomoSAR) has been widely used in three-dimensional (3D) reconstruction of urban buildings. However, due to the baseline distribution and the limitations of the algorithm itself, the building point cloud after tomographic imaging is flooded by substantial noise and/or false targets. Thus, TomoSAR point clouds must be extracted from these unwanted factors to reconstruct the building structure. Existing line-based extraction methods can only detect straight lines, which results in the loss of non-linear point clouds. Thus, inspired by density clustering, we propose a point cloud extraction method using the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm. The DBSCAN can preserve the building structure more completely by enabling the extraction of various shapes of the buildings. Since the detection of point clouds is density-based, noise and false targets that exhibit low-density distribution can be accurately detected and rejected. The experimental results demonstrated the effectiveness of our method for TomoSAR point cloud extraction, as well as the structural protection of buildings, which achieves a higher extraction accuracy compared to linear detection.
Guo et al. (Wed,) studied this question.