Key points are not available for this paper at this time.
Abstract The high-speed rotation of impellers leads to strong rotor–stator interaction, which mainly causes the pressure pulsation of centrifugal pumps. An impeller with a bionic sinusoidal tubercle trailing edge (STTE) can reduce the intensity of the rotor–stator interaction and thus reduce the pressure pulsation of the centrifugal pump. In this study, three profiles of STTE were designed based on the pectoral fin structure of humpback whales of which the influence on the pressure pulsation of centrifugal pumps was studied via experiment and numerical simulation. Results show that a reasonable design of STTE can effectively eliminate the high-frequency pressure pulsation in the rotor–stator interaction region of the centrifugal pump. The use of STTE2 and STTE3 profiles affect the amplitude reduction of pressure pulsation at the blade passing frequency (fBPF). Compared with the impeller without the STTE profile, the amplitudes of pressure pulsation with STTE2 and STTE3 profiles are decreased by 47.10% and 44.20% at the pump discharge, while the decrease, at the volute throat is 30.36% and 25.97%, respectively. Detailed flow structures inside the pump show that the STTE profile can inhibit the vortex generation at the blade trailing edge, and the local high-intensity pressure pulsation can be reasonably avoided. This study helps improve the pressure pulsation characteristic of centrifugal pumps and their operation stability.
Lin et al. (2021) studied this question.