Optimization of process parameters in fused deposition modelling of thermoplastics: A review

Abstract Among the several techniques for additive manufacturing (AM), fused deposition modelling (FDM) is widely used. Fused deposition modelling process uses a thermoplastic material, which is melted and then extruded layer by layer through a nozzle, in order to create a three‐dimensional object. As a result of the default setting of process parameters provided by the manufacturers, produced parts normally have a poor surface finish, low mechanical properties, low dimensional accuracy, and increased residual stresses compared to the parts produced using conventional manufacturing processes like molding (casting). Qualities of fused deposition modelled (FDMed) parts are generally affected by process parameters including the layer thickness, extrusion temperature, build orientation, printing speed, raster angle, infill density, raster width, nozzle diameter, and air gap. Increasing infill density, printing temperature, and decreasing print speed and layer thickness lead to increase mechanical strength and improve the surface finish of the printed parts. The optimal process parameters are preferred to achieve superior properties of the parts. This paper reviews the optimal fused deposition modelling process parameters on part qualities for making the stability of used deposition modelled parts for use. Various process parameters are identified in order to obtain desirable qualities in the manufactured parts. Areas for future research are proposed.