Key points are not available for this paper at this time.
This study aimed to suggest a solidification map based on the solidification parameters G and R of each layer in the multilayer deposition for the investigation of heat accumulation on the deposit. Through the solidification map, the appropriate solidification conditions of the microstructure were determined. In order to investigate the solidification parameters, the temperature profile of the deposit was experimentally acquired during deposition. A simulation model reflecting the characteristics of the deposition process was developed and verified. The solidification parameters from the simulation model and the microstructure from experiments were correlated. Based on the analysis, a solidification map of 316L SS processed with CMT-WAAM process was derived, which is suggested as a guide for controlling and predicting the morphology of the microstructure in the deposit.
Park et al. (Thu,) studied this question.