Key points are not available for this paper at this time.
In this article, the characteristics of Chang 8 reservoir of Triassic Yanchang Formation in northern Shaanxi are studied by using polarizing microscope, field emission scanning electron microscope, image particle size, X-ray diffraction analysis of clay, and constant pressure mercury intrusion. The study shows that the target layer is in a relatively stable and uniform sinking burial period after deposition, and the lithology composition in the area is relatively complex, mainly composed of debris–feldspar sandstone and feldspar sandstone, with the characteristics of fine grain and high content of interstitial material. The porosity of the reservoir is generally between 4% and 12%, with an average of 8.05%. The permeability is generally between 0.03 × 10 −3 and 0.5 × 10 −3 μm 2 , with an average of 0.16 × 10 −3 μm 2 . Strong compaction and well-developed cementation of calcareous, siliceous, and authigenic illite are important reasons for the formation of extra-low porosity and extra-low permeability reservoirs. But at the same time, because of the protective effect of chlorite film, some residual intergranular pores are preserved, which makes the some reservoirs with relatively good physical property, forming a local relatively high-porosity and high-permeability section of the “highway.”
Building similarity graph...
Analyzing shared references across papers
Loading...
Xingying Wang
Na Liu
Junxiang Nan
Frontiers in Physics
SHILAP Revista de lepidopterología
Research Institute of Petroleum Exploration and Development
Xi'an Shiyou University
Yuntianhua Group (China)
Building similarity graph...
Analyzing shared references across papers
Loading...
Wang et al. (Wed,) studied this question.
www.synapsesocial.com/papers/69d7bb2905ee2ba81dbed8e4 — DOI: https://doi.org/10.3389/fphy.2021.801264