Key points are not available for this paper at this time.
In the process of building construction, traditional architectural design and construction methods take a long time. The built buildings perform poorly in terms of energy usage and energy conservation. The study expects to explore the potential safety hazards of prefabricated buildings during the construction process. On this basis, a modelling study of the construction process is carried out. The study uses Digital Twins (DTs) technology and prefabricated Building Information Modelling (BIM) to conduct in‐depth modelling research on the building construction process. The prefabricated building construction system oriented to DTs technology can well solve the problems of structural damage and deformation in the production, transportation, and assembly process of building components. Especially in prefabricated buildings, it can monitor and accurately predict the damage of building components that may occur in the entire system due to structural problems and material problems in real time. Regarding the building information model, the study uses third‐party software to transfer the assembly information to the network cloud to further realize the display of the BIM. The study shows that the maximum value of the effective risk cases selected is 130, and its effective rate is 100%; after processing the data, it is found that the initial value is always stable, and its value is 1; the extracted value is always changing, the maximum value is 0.86, and the minimum is 0.75. By this result, the conclusion is that DTs technology and BIM can effectively monitor the indicators of risk problems during the construction of prefabricated buildings and can further reduce potential safety hazards. Through building information modelling, the development of intelligent industrialization of building construction design and the in‐depth study of construction modelling has practical application value.
Zhou et al. (Fri,) studied this question.