Key points are not available for this paper at this time.
Perovskite quantum dots (PQDs) are applicable in light-emitting diodes (LEDs) owing to their color tunability, high color purity, and excellent photoluminescence quantum yield (PLQY) in the solution state. However, a PQD film obtained through nonradiative recombination by concentration quenching and the formation of surface defects exhibited a low PLQY. In this study, we focused on the energy transfer between PQDs with different energy gaps (Eg) to reduce nonradiative recombination in the film state and consequently achieve high device performance. We prepared size-controlled PQDs measuring 10.7 nm (large-size QD; LQD) and 7.9 nm (small-size QD; SQD) with different Eg values and observed a spectral overlap between SQD emission and LQD absorption. To investigate the Förster resonance energy transfer (FRET) from SQDs to LQDs, we prepared SQD–LQD mixed QDs (MQDs). The MQD film enhanced LQD emission and exhibited a higher PLQY (52%) with a longer PL decay time (7.4 ns) than those exhibited by the neat LQD film (38% and 6.2 ns). This energy transfer was determined to be FRET by photoluminescence excitation and PL decay times. Moreover, the external quantum efficiency of an MQD-based LED increased to 15%, indicating that the FRET process can enhance the PLQY of the film and LED efficiency.
Ebe et al. (Tue,) studied this question.