Key points are not available for this paper at this time.
The boosting efficiency of perovskite solar cells (PSCs) has evoked the interest in applying them in tandem structures, especially perovskite/silicon tandem solar cells. However, the tandem solar cells still face concerns about stability, upscaling, and cost‐effectiveness on the path to commercialization. Herein, an innovative tandem architecture based on the printable mesoscopic perovskite solar cells is proposed. By investigating the effects of indium tin oxide (ITO) particle size, annealing temperature, and dispersant on the performance of ITO mesoporous films, screen‐printable mesoscopic ITO electrode with an electron mobility of 7.5 cm2 V−1 s−1 and an average visible transmittance of over 80% is successfully obtained. The screen‐printed mesoporous titania, zirconia, and ITO are used as a scaffold and a semitransparent PSC with a champion power conversion efficiency of 9.38% is fabricated infiltrated with perovskites. Further, a perovskite/silicon tandem device which can remain stable for >720 h is demonstrated, highlighting the potential of screen‐printed inorganic scaffold structure in tandem photovoltaic technique.
Ye et al. (2022) studied this question.