Key points are not available for this paper at this time.
Abstract This article presents the design and fabrication of an air purifier that uses a water-based technique to clean indoor/outdoor transitional air to provide a low-tech air purifier against the annual smog crisis and the ongoing COVID-19 pandemic. The air purifier was designed and built. All tests were conducted in a closed room as well as a semi-outdoor area. Particle sizes of PM0.3, 0.5, 1.0, 3.0, 5.0, and 10 μm (particle/m 3 ) were measured at an air inlet, air outlet, 2 m from an air inlet, and 4 m from an air outlet after 0, 5, 10, 15, and 20 min of air treatment, respectively, as well as CO 2 levels and relative humidity (RH). The average airflow rate was also measured. When compare to 0 min, all parameters, except semi-outdoor PM0.3 and CO 2 levels, tend to decrease in both indoor and semi-outdoor conditions. When measure by total airflow specification of a dual ventilation fan, the average airflow rate at an air outlet is reduced by 20 times. Article Highlights Design and fabrication of a water-based air purifier. A low-tech air purifier helping to protect against the annual smog crisis and the ongoing COVID-19 pandemic. The novel water-based air purifier effectively traps air particles ranging in size from 0.5 to 10 µm.
Arnon Jumlongkul (Mon,) studied this question.