Key points are not available for this paper at this time.
Urban overheating significantly affects people’s physical and mental health. The addition of street trees is an essential, economical, and effective means by which to mitigate urban heat and optimize the overall thermal environment. Focusing on typical street canyon clusters in Harbin, China, landscape morphology was quantified by streetscape interface measurements (sky view factor, tree view factor, and building view factor). Through ENVI-met simulations, the correlation mechanism between streetscape interface measurements and thermal environment was evaluated, and optimization methods for assessing the thermal environment of urban streets were proposed. The results revealed: (1) The thermal environment optimization efficiency of general street canyon types was greatest when street tree spacing was 12 m. At present, the smaller spacing has not been simulated and may yield better thermal environment results. The average decrease in temperature (Ta), relative humidity (RH) and mean radiant temperature (MRT) was 0.78%, 2.23%, and 30.20%, respectively. (2) Specific street canyon types should adopt precise control strategies of streetscape interface according to their types to achieve the optimal balance between thermal environment optimization and cost. (3) Streetscape interface measurements and thermal environment indexes show quadratic correlation characteristics, and are critical points for further investigation. The conclusions are more specific than previous research findings, which are of great significance for decreasing the urban heat island effect at the block scale, improving residents’ physical and mental health, and improving the urban environment quality.
Li et al. (Tue,) studied this question.