Key points are not available for this paper at this time.
Abstract Formation of ionogels through in situ polymerization can effectively improve electrolyte processability; however, the curing process has been slow and oxygen‐sensitive. Considering the low oxygen solubility of poly(ionic liquid)s (PILs), in situ polymerized ionogels are designed to realize excellent electrolytes. Herein, two in situ polymerized ionogels (PIL A & PIL B) are formulated, and they can be rapidly photocured within a minute. The ionogels are highly transparent, stretchable, and exhibit excellent physicochemical stability, including thermal, electrochemical, and air stability, allowing them to perform in various conditions. Benefitting from these properties, two high‐performance electrochromic devices (ECDs) are assembled, with iron‐centered coordination polymer (FeCP) and tungsten oxide (P‐WO 3 ) electrochromic materials, achieving high color contrast (45.2% and 56.4%), fast response time (1.5/1.9 and 1.7/6.4 s), and excellent cycling endurance (>90% retention over 3000 cycles). Attributed to the thermal robustness of the ionogels, the ECDs can also be operated over a wide temperature range (−20 to 100 °C). With the use of deformable substrates (e.g., ultrathin ITO glass), curved electrochromic eye protector and flexible electrochromic displays are realized, highlighting their potential use in futuristic wearables.
Poh et al. (Tue,) studied this question.