Taguchi L 16 (4 4 ) orthogonal array-based study and thermodynamics analysis for electro-Fenton process treatment of textile industrial dye

Abstract Reactive orange 16 (RO16) is the most widely used azo dye in Textile industry. Complex aromatic structures and resistivity to biological decay caused the dye pollutants incompletely treated by the conventional oxidative methods. The current study presents the electro-Fenton-based advanced oxidation treatment of RO16 dye and the process optimization by Taguchi-based design of experiment (DOE). Using a 500 mL volume lab-scale experimental setup, the process was first studied for the principal operational parameters (initial dye concentration ( q ); H 2 O 2 /Fe +2 ( R ); current density ( ρ ); and temperature ( T )) effect on decolourization ( D R ) and COD removal ( C R ). Then, by means of the L 16 (4 4 ) orthogonal array (OA) formation, standard mean and signal-to-noise (S/N) ratio, the process was optimized for the response variables. The result showed the optimized result at q = 100 mg/L, R = 100, ρ = 8 mA/cm 2 , and T = 32 °C; with D R and C R as 90.023 and 84.344%, respectively. It was found that the current density affects the process most, followed by H 2 O 2 /Fe +2 ratio, initial dye concentration, and temperature i.e., ρ > R > q > T . Also, with the analysis of variance (ANOVA), model equations for D R and C R were developed and its accuracy was verified for experimental results. At optimized conditions, the first order removal rate constants ( k a ) were found from batch results. Additionally, the thermodynamic constants (Δ H e , Δ S e , and Δ G b ) were also calculated for the nature of heat-energy involved and temperature effect study on dye degradation. The results showed that the process was thermodynamically feasible, endothermic, and non-spontaneous with a lower energy barrier ( E A = 46.7 kJ mol −1 ).