Key points are not available for this paper at this time.
With the development trend and technological progress of lithium batteries, the battery market is booming, which means that the consumption demand for lithium batteries has increased significantly, and, therefore, a large number of discarded lithium batteries will be generated accordingly. Solvent extraction is a promising approach because it is simple. Solvent extraction is low in time consumption and is easy to industrialize. This paper is focused on the selective recovery of cobalt (Co), nickel (Ni), and manganese (Mn) contained in leachate obtained by digesting a cathodic material from spent lithium batteries with hydrochloric acid. After leaching the cathodic material, Mn was selectively extracted from leachate by using solvent extraction with D2EHPA diluted in kerosene in an optimized condition. Afterward, Co was extracted from the Mn-depleted aqueous phase using Cyanex272 diluted in kerosene. Finally, the raffinate obtained via a stripping reaction with H2SO4 was used in the Ni extraction experiments. Cyanex272 extractant was employed to separate Ni and Li. The process can recover more than 93% of Mn, 90% of Co, and 90% of Ni. The crucial material recovered in the form of sulfuric acid solutions can be purified and returned to the manufacturer for use. This process proposes a complete recycling method by effectively recovering Mn, Co, and Ni with solvent extraction, to contribute to the supply of raw materials and to reduce tensions related to mineral resources for the production of lithium batteries.
Tang et al. (Fri,) studied this question.