Key points are not available for this paper at this time.
Abstract In this study, the wear performance of boron carbide (B 4 C) and graphene (Gr) particles reinforced Al–Cu alloy composites was investigated. The composite samples were made using the solid-state manufacturing process. The wear performance was assessed using a pin-on-disc tribometer. The Taguchi optimization approach was used to determine the performance of each parameter. All experiments were carried out using the L27 array, which included three sets of parameters such as applied load, disc speed, and reinforcement percentage. The ANOVA approach was used to examine the impact of each parameter. According to the findings, the weight on the pin has the greatest influence on wear, followed by sliding speed and reinforcing percentage. The addition of B 4 C particles improves the wear resistance, and the Gr functions as a self-lubricating agent while in use. Scanning electron microscope analysis of worn-out samples revealed an abrasive type of wear process.
Sachit et al. (Sun,) studied this question.