Simulation Study on Seepage Patterns of Geothermal Reinjection in Carbonate Thermal Reservoir and Geothermal Doublet Well Patterns in Xiong’an New Area

The karst fissures of the carbonate thermal reservoir in Xiong’an New Area have developed, and they have the advantages of a concentrated distribution, shallow burial, large water volume, and easy recharge, which are conducive to the development and utilization of geothermal resources. This paper took the carbonate thermal reservoir in Xiong’an New Area as the research object and studied the characteristics of the seepage patterns and temperature distribution in thermal storage with different well arrangements and recharge methods by laser etching the micromodel of the carbonate thermal reservoir and simulating the recharge methods. The paper established a numerical model of the resettlement area of Xiong’an New Area based on the production data and the current recharge well pattern, and it proposed a plan for a geothermal doublet well arrangement. The results showed that the injection speed and angle significantly influenced the seepage of injected water in the fractured reservoir. The injection speed correlated with the breakthrough time and swept area. The breakthrough time plummeted as the injection speed increased, and the swept area crept up as the injection-fracture dip increased. The well arrangements also impacted the seepage patterns. The well pattern of two injectors and three producers was relatively suitable for geothermal reinjection, and it was more appropriate to choose the maximum injection-fracture dip because of the largest swept area. Factors that affected the sustainable development and utilization of geothermal fields included the well pattern arrangement, well spacing, injection and production volumes, and the temperature of the injected water. Based on the modeling, it is recommended that the well spacing be greater than 500 m, and the injection and production volumes less than 110 m3/h in the resettlement area of Xiong’an New Area. Moreover, a vertical fracture well is recommended to reduce thermal breakthroughs.