Key points are not available for this paper at this time.
Abstract High‐entropy alloys (HEAs) provide unprecedented physicochemical properties over unary nanoparticles (NPs). According to the conventional alloying guideline (Hume–Rothery rule), however, only size‐and‐structure similar elements can be mixed, limiting the possible combinations of alloying elements. Recently, it has been reported that based on carbon thermal shocks (CTS) in a vacuum atmosphere at high temperature, ultrafast heating/cooling rates and high‐entropy environment play a critical role in the synthesis of HEAs, ruling out the possibility of phase separation. Since the CTS requires conducting supports, the Joule‐heating efficiencies rely on the carbon qualities, featuring difficulties in uniform heating along the large area. This work proposes a photo‐thermal approach as an alternative and innovative synthetic method that is compatible with ambient air, large‐area, remote process, and free of materials selection. Single flash irradiation on carbon nanofibers induced momentary high‐temperature annealing (>1800 °C within 20 ms duration, and ramping/cooling rates >10 4 K s −1 ) to successfully decorate HEA NPs up to nine elements with excellent compatibility for large‐scale synthesis (6.0 × 6.0 cm 2 of carbon nanofiber paper). To demonstrate their feasibility toward applications, senary HEA NPs (PtIrFeNiCoCe) are designed and screened, showing high activity (η overall = 777 mV) and excellent stability (>5000 cycles) at the water splitting, including hydrogen evolution reactions and oxygen evolution reactions.
Cha et al. (Tue,) studied this question.