Influence of visible light LEDs modulation techniques on photocatalytic degradation of ceftriaxone in a flat plate reactor

In this paper, the effect of light modulation on photocatalytic ceftriaxone (CEF) degradation in aqueous solution was investigated. The experimental set-up consisted of a fixed bed photocatalytic reactor with a flat plate geometry and visible LEDs for irradiation. Fe-N-codoped TiO2 photocatalyst was immobilized on a polystyrene plate (PS) by solvent casting method to achieve a structured photocatalyst (Fe-N-TiO2/PS), which was loaded in the photoreactor. Raman and UV–Vis diffuse reflectance spectroscopy confirmed the presence of Fe-N-TiO2 on the PS surface and its uniform distribution on the polymer support. Various LEDs dimming techniques were tested with fixed and variable duty-cycle values. In particular, the following modulations were used: fixed duty-cycle (FD), sinusoidal variable duty-cycle (S-VD), triangular variable duty-cycle (T-VD), square wave variable duty-cycle (SW-VD), saw-tooth variable duty-cycle (ST-VD), pulse variable duty-cycle (P-VD), and pseudo-sinusoidal variable duty-cycle (PS-VD). The optimal light modulation was the S-VD, with an average fed current between 25 and 75 mA and a period of 30 s. Indeed, by using S-VD modulation, the highest value of the apparent CEF degradation kinetic constant (resulting 0.0082 min−1) and the highest total organic carbon (TOC) removal (70 %) were achieved. By comparing the electric energy consumption (EE/O) with S-VD modulation used in this work with those found in other literature studies dealing with the photocatalytic ceftriaxone degradation, a significant decrease of EE/O was evidenced. Moreover, toxicity test showed that the photocatalytic treatment allowed to significantly reduce the toxicity of CEF solution when compared to untreated effluent.