Lubrication Modeling of the Reciprocating Piston with High Lateral Load and Various Conditions in a Swash Plate-Type Piston Pump

Most asymmetrical lateral forces occur in the reciprocating piston mechanism, which is widely applied as a major component of power equipment. When this lateral force greatly acts on the piston, it comes into contact with the cylinder. To prevent this negative phenomenon, lubrication characteristic evaluation and control technology are necessary. In this study, a boundary lubrication model considering the elastic deformation of the contact surface was adopted to perform a lubrication analysis of a piston hydraulic pump widely used in the aviation and plant industries. The piston/cylinder mechanism was analyzed in terms of contact force, characteristic thickness, and power loss while varying various design and operating parameters (friction coefficient, clearance, profiling shape, operating speed, and pressure). In the overall bearing capacity to withstand the tilt of the piston, the bearing capacity ratio due to contact at the interface increased more steeply than the bearing capacity ratio in the fluid lubrication area. Profiling of the piston head played a positive role in reducing power loss but also increased piston tilt. This trend appeared more clearly as the head profiling degree of processing Increased. Lastly, the effects of variable operating speed and pressure were examined. High operating speed caused low contact force, and high operating pressure caused high contact force. Through this study, it was possible to predict the lubrication performance and power loss of reciprocating piston pumps used in the field more realistically through appropriate boundary lubrication modeling.