Key points are not available for this paper at this time.
In this study, production and isolation of glucaric acid from lignocellulosic biomass were performed via potassium cation-based TEMPO-mediated oxidation for the ease of glucaric acid isolation. To optimize the oxidation conditions, response surface methodology (RSM) was adopted using standard glucose as the raw material. Among the oxidation conditions, the dosage of oxidant and pH of reaction affected the glucaric acid production, and the optimum conditions were suggested by RSM analysis: 5 °C of reaction temperature, 4.23 equiv dosage of KClO per mole of glucose, and pH of 12. Furthermore, glucaric acid was produced from lignocellulosic biomass-derived enzymatic hydrolysate from Miscanthus under optimum conditions. The impurities such as xylose and lignin in enzymatic hydrolysate inhibited the efficiency of glucose oxidation. As a result, more oxidant was required to produce sufficient glucaric acid from the enzymatic hydrolysate compared to standard glucose. The produced glucaric acid was simply isolated by controlling the pH in the form of glucaric acid monopotassium salt, which showed lower solubility in water, and the purity of isolated glucaric acid was over 99%. The overall mass balance of feedstock to glucaric acid was analyzed, suggesting that 86.38% (w/w) glucaric acid could be produced from initial glucan in feedstock.
Kim et al. (Fri,) studied this question.