Key points are not available for this paper at this time.
The use of additives to produce warm bituminous mixtures in asphalt pavements gives the possibility to decrease temperatures with positive implications on energy consumption, and on emissions of greenhouse gases and airborne pollutants.This study investigates the changes in energy and environmental performance of an asphalt plant switching from hot to warm asphalt concrete production.A full-scale trial section was constructed in an Italian motorway with recycled bituminous mixtures containing SBS polymer modified bitumen.Reference hot mix asphalts (HMAs) mixed at 170 • C were compared with warm mix asphalts (WMAs) mixed at 130 • C with different chemical additives.Calculations and analysis were performed considering three production phases during which the production technologies (HMA and WMA) and the mixture types varied in temperatures, mixing duration, and quantity of virgin materials employed.Energy performance was calculated through values provided by the asphalt plant operator and thermodynamic equations.Emissions of CO2 were calculated based on energy consumption and emission factors reported in the literature for the Italian energy mix.Airborne pollutants were measured at the stack of the dryer drum.The results showed that for each mixture type, a reduction of 40 • C in the production temperature corresponds to 15% lower thermal energy values for the drying/heating of the aggregates, with consequent lower consumption of fuel oil.The drying/heating of aggregates for WMA lead to lower emissions of particulate matter, NOx, and VOCs compared to HMA.
Ferrotti et al. (Mon,) studied this question.