Assessment of Engineering Behavior and Water Resistance of Stabilized Waste Soils Used as Subgrade Filling Materials

Urban construction has generated substantial amounts of waste soils, impeding urban ecological development. With the aim of promoting waste recycling, waste soils possess a high potential for sustainable utilization in subgrade construction. However, these waste materials exhibit inadequate engineering properties and necessitate stabilization for an investigation into their long-term performance as subgrade filling materials. Initially, a thorough assessment and comparison were conducted to examine the key mechanical properties of lime- and cement-stabilized soils with mixed ratios (total stabilizer contents ranging from 2% to 8%). The results indicated that these soils met the requirements of subgrade materials except for the 2% lime-treated soil. Subsequently, to reveal the improvement in water resistance of stabilized waste soil (e.g., under conditions of rainfall or elevated groundwater table), the effects of soil densities and stabilizer contents on the disintegration characteristics were investigated using a range of disintegration tests. An evolutionary model for the disintegration ratio of stabilized soils was then developed to predict the process of disintegration breakage. This model facilitates the quantification of the lower disintegration rates and elevated disintegration time attributed to higher levels of compactness and stabilizer contents during a three-stage disintegration process. This enhances the understanding and evaluation of sustainable applications in stabilized waste soils used as subgrade filling materials.