Key points are not available for this paper at this time.
As 26%–37% of total faults occurring in induction motors (IMs) are stator winding faults, their detection is crucial to prevent unexpected downtime. Therefore, a new technique for fault detection, discrimination, and categorization of stator winding faults occurring in IM is presented. Initially, sequence components of voltages ({V ₁ₙ//₍}) and currents ({I ₁ₙ//₍}) from the supply side and currents ({I₂ₙ/{p/n}}) from the remote side are calculated. Then, after calculating the difference of unbalanced factor (DoUF) during both normal and faulty conditions, the abnormal condition indicator (ACI) is derived for effective discrimination between normal conditions and abnormal situations. Thereafter, phase angle differences, i. e. , \ { ₁₍}\ and \, {₂₍} utilizing supply-side negative sequence voltages and currents and remote-side negative sequence currents are estimated. Finally, discrimination between internal and external faults is achieved using \ { ₁₍}, and the analysis completed with the classification of internal faults utilizing \ { ₂₍}, {I ₂₍}, and {I₂ₙ}. The suggested technique is validated by generating numerous test cases whose signals are acquired from the laboratory prototype of induction motors (IMs). The outcomes demonstrate the robustness of the presented method to identify and classify internal faults even with varying fault resistance and load conditions. Additionally, it stays extremely stable against external faults even under current transformer saturation conditions.
Sharma et al. (Tue,) studied this question.