Key points are not available for this paper at this time.
A maximum power point tracking (MPPT) is required to get the highest possible power generated from a PV cell. Numerous researchers have proposed different MPPT strategies to be able to collect maximum generated electricity from the photo voltaic cells.In this research, MPPT model predictive control strategy for a grid-connected PV system is presented. Model predictive control (MPC) was used to develop and model the AC load energy tracking efficiency for the PV systems with a power rate of 20 kW at standard test conditions. For the purpose of obtaining the power tracking performance, a DC-DC boost converter, DC-AC two level three phase inverter, and control mechanism for a grid connected AC load system was examined and presented in this paper. To approximate the actual PV array properties, the PV model is used, and the MPPT approach is suggested as a way to regulate the DC-DC boost converter and get the most power possible from the PV array when compared to P&O and model predictive control system. A three-phase, two-level VSI is employed in this study that is controlled by a model predictive control system with SVPWM. The inverter's control structure is developed using a model predictive control system (inner loop current controller) with reference frame transformation (abc to dq) coordinates by utilizing PLL. The PLL is used to obtain critical information about the grid voltage. A RL filter is then used to lower the total harmonic distortion of the output and connect the inverter's output to the grid. The MATLAB R2019a environment is used to create the system model. The overall performance of the system for conventional perturb and observer is around 97.72%, while for Finite Control Set Model Predictive Controller is 99.80%, which is better than previous similar research with faster time response and less oscillation around maximum power point.
Salau et al. (Fri,) studied this question.