Method to measure tree-ring width, density, elemental composition, and stable carbon and oxygen isotopes using one sample

Abstract Tree-ring width (RW), density, elemental composition, and stable carbon and oxygen isotope (δ 13 C, δ 18 O) are widely used as proxies to assess climate change, ecology, and environmental pollution; however, a specific pretreatment has been needed for each proxy. Here, we developed a method by which each proxy can be measured in the same sample. First, the sample is polished for ring width measurement. After obtaining the ring width data, the sample is cut to form a 1-mm-thick wood plate. The sample is then mounted in a vertical sample holder, and gradually scanned by an X-ray beam. Simultaneously, the count rates of the fluorescent photons of elements (for chemical characterization) and a radiographic grayscale image (for wood density) are obtained, i.e. the density and the element content are obtained. Then, cellulose is isolated from the 1-mm wood plate by removal of lignin, and hemicellulose. After producing this cellulose plate, cellulose subsamples are separated by knife under the microscope for inter-annual and intra-annual stable carbon and oxygen isotope (δ 13 C, δ 18 O) analysis. Based on this method, RW, density, elemental composition, δ 13 C, and δ 18 O can be measured from the same sample, which reduces sample amount and treatment time, and is helpful for multi-proxy comparison and combination research.