Key points are not available for this paper at this time.
Aiming at the problems found in grinding Jun-Cao, such as poor grinding effect and high grinding power of mill, this study proposes a blade Jun-Cao grinding hammer based on the traditional hammer mill. With dynamics model analysis, it had better performance than a traditional hammer. By simulating the operation process in the DEM, forces on Jun-Cao and their motions were analyzed. By optimizing the structural parameters of the hammer blade based on multiobjective optimization using the genetic algorithm, an optimal solution set was obtained as a reference for practical production. Meanwhile, a bench test was designed to compare the traditional rectangular hammer with the new blade hammer regarding the operation effect. The result proved the following: (1) cutting edge length, cutting edge thickness and hammer thickness had a significant influence on the grinding effect and grinding power; (2) a total of 22 optimal solution sets were obtained, based on which the blade hammer with a cutting edge length of 45 mm, a cutting edge thickness of 3 mm and a hammer thickness of 7 mm was finally selected in the bench test; (3) the bench test proved that the blade hammer was generally superior to the traditional rectangular hammer with the output per kilowatt-hour having been improved by 13.55% on average.
Zheng et al. (Mon,) studied this question.