GNSS Ground deformation observation network optimization assisted using prior InSAR-derived ground surface deformation and multiscale iteration estimation

Ground surface deformation must be monitored to understand and prevent geological hazards. Global navigation satellite system (GNSS) technology has been widely used in deformation monitoring; however, current GNSS station layout strategies are often subjective and lack theoretical guidance. Therefore, in this study, a GNSS deformation observation network optimization method was developed based on interferometric synthetic aperture radar (InSAR) prior to deformation assistance. This method considers the deformation distribution, cost, accuracy, topography, and actual monitoring requirements and uses kriging interpolation and multiscale iterative optimization to obtain the reference number, spatial distribution, and deformation capture accuracy of GNSS stations in areas experiencing deformation. Simulation experiments showed that the proposed method strengthened the spatial deformation monitoring ability of GNSS by 46%–68% compared with the traditional station layout methods, which ignore the distribution of the deformation. Then, based on the small baseline subset (SBAS) InSAR technology and applying the new method, we evaluated the number and location of the most suitable GNSS stations for a mining area and found that 89.6% of the error was less than 1.5 cm, which further illustrates the practicability and reliability of the proposed method. This method provides an effective supplement to station layouts for monitoring GNSS deformation.