Key points are not available for this paper at this time.
Abstract Compared with steel core aluminum strand wire, carbon fiber composite core wire has many excellent characteristics such as large flow capacity, good heat resistance, light weight, but its mechanical properties are poor, and the unqualified crimping quality is easy to lead to wire breakage accidents, which greatly affects its popularization. For this reason, a scheme for the detection of crimping defects of carbon fiber composite mandrel based on magnetic leakage method is proposed. Firstly, the finite element analysis model of the clamping fixture was established, and then the magnetic pole distance k and radial air gap n of the magnetic leakage testing device were explored. Based on the signal-to-noise ratio under the two typical defect conditions of fracture and low pressure, the most suitable excitation structure parameters of the magnetic leakage device were obtained. The results show that when k=55mm and n=3.5mm, the signal-to-noise ratio of MFL detection device reaches the best effect. The research results are of great significance to the quality inspection of compacts of carbon fiber composite mandrel.
Zhang et al. (Fri,) studied this question.