Key points are not available for this paper at this time.
Abstract: Recently, the emergence of single phase multilevel inverter has been increased due to its advantages over traditional one. Multilevel Inverters MLI are the ones which can give out a stepwise output waveform with the use of power electronic switches, power diodes and some DC voltage source which might be a series/parallel connected PV cells, a renewable source or a battery. Multilevel inverters not only produce low harmonic distortion but also decrease the dv/dt stresses on the equipment Multilevel inverters is a good option as the output voltage of a Multilevel inverter is a stepped waveform which approaches a sinusoid providing lesser harmonic distortion. As the number of levels are increased the harmonic distortion reduces but at the same time the number of switching devices and the DC voltage sources required increases, thus increasing the complexity of the system design and control. Multilevel inverter proposed in this paper uses only 7 switches to provide 9 levels and 15 levels of output voltage. A symmetrical Cascaded H bridge Multi level inverter (SCHBMLI) and Asymmetrical Cascaded H bridge Multilevel Inverter (ASCHBMLI) using PD-PWM technique have been analysed in this paper for grid connection. The Asymmetric Cascade H Bridge ASCHMLI implemented in real time system using PIC16F877A microcontroller with RL load. This type of proposed system is used for high power applications in photovoltaic and it’s reduce overall cost as well as size of the system.
Mr. D. S. Veeranna (Fri,) studied this question.