Key points are not available for this paper at this time.
The high flatness quenching of ultra-high-strength steel sheets is a technical problem in the steel industry. In this study, the traditional water and spray quenching methods were abandoned, and the roller-constrained slot air-jet quenching method was proposed for steel sheets below 3 mm thickness, which provided a theoretical reference for producing thinner, wider, and higher-flatness steel sheets. A 2D roller-constrained slot air-jet numerical model was established to study the flow field and heat transfer characteristics under the conditions of Reynolds number 24,644–41,076, a dimensionless jet height of 16–24, and a jet angle of 45°–135°. The results showed that the average Nusselt number on the heat transfer surface was proportional to Rem. At the same time, high-intensity heat transfer was achieved when the dimensionless height and jet angle were properly combined. At the same Reynolds number, the heat transfer intensity could be increased by 289%. In addition, the position of the peak Nusselt number was affected by reducing the jet angle, which served as an effective strategy for adjusting the martensite ratio and obtaining ideal mechanical properties.
Ye et al. (Sun,) studied this question.