Key points are not available for this paper at this time.
Shading on photovoltaic (PV) modules due to shadows, covering, dust, etc., usually characterized as semi-transparent, will significantly affect the power generation capacity. No systematic study has considered the impact of semi-transparent coverings on the power generation capacity of PV modules. This paper covers a single cell in the PV module using a covering with a transmittance of 18.55% and systematically investigates its impact on the power generation capacity. The open-circuit voltage (Voc) of the PV module is nearly unaffected by semi-transparent coverings because the covered cell can be considered as working at a lower irradiance and thus can output a voltage close to that of the uncovered cell. The short-circuit current (Isc) is significantly affected by coverings because it is co-contributed by the photocurrent (evaluated based on the covering ratio R and transmittance) and the reverse bias current ΔIsc (the covered cell is in a reverse bias state). The ΔIsc increases with R because more charge accumulates at the bi-ends of the covered cell; but, it decreases at full covering, which implies that in a partially covered case the uncovered part contributes more to ΔIsc than the covered part. The fill factor (FF) of the PV module first increases and then decreases with R, as the equivalent resistance of the covered cell increases rapidly with R, which replaces the wire resistance in dominating the series resistance of the PV module when R > 0.6. This work is of great theoretical significance in analyzing the output characteristics of PV modules under real conditions.
Li et al. (Wed,) studied this question.