Key points are not available for this paper at this time.
The numerical investigation has been carried out on an under-expanded supersonic jet impingement on the perpendicular and inclined deflector plates of various shapes, such as flat, sinusoidal, and wedge types. The numerical study considers flat plates at Mach number of 2.2, and pressure ratio of 1.2, and results of flow and heat transfers are obtained using the Reynolds averaged Naiver Stokes (RANS) two-equation turbulence models. Various two-equation models (especially Standard k-ε, Reynolds Normalization Group k-ε, Realizable k-ε, Shear Stress Transport k-ω, and Baseline k-ω) were employed to predict the deflector's surface temperature and pressure ratios. The pressure ratios are plotted with various two-equation turbulence models, and it is observed that among all turbulence models, the Shear Stress Transport k-ω shows close agreement with experimental results. Moreover, among the three deflectors, the wedge-shaped deflector shows improved performance in deflecting the rocket exhaust plume away from the surface. However, the maximum temperature on the deflector surface for a wedge-shaped deflector is 8.19% and 26% higher than the flat and sinusoidal-shaped deflectors, respectively.
Singh et al. (Thu,) studied this question.