Seismic Response of Vertical Hybrid Concrete/Steel Frames Considering Soil–Structure Interaction

The aim of this study is to investigate the seismic behavior of concrete/steel mixed structures. In engineering praxis, many buildings consist of two parts: one made of reinforced concrete and the other made of steel. There are several difficulties in the code-based seismic design of these structures due to the different dynamic responses of each discrete part. Seismic design codes, such as the IBC and Eurocode 8, do not provide instructions for structures consisting of two parts. In addition, they use a single-loading scenario, but there are many locations that are affected by more than one earthquake in a short period. Another drawback is that recent provisions do not consider soil–structure interaction effects. The specific issue addressed here is the seismic response of mixed structures, which is evaluated through inelastic time–history analysis. More specifically, the response indices involve height-wise distributions for peak interstory drift ratios, maximum floor horizontal displacements, maximum floor accelerations, and plastic hinge formations in the frame elements when they are subjected to seismic sequences of earthquakes, as well as in far fault ground motions for different soil types. The results reveal that sequential ground motions lead to increased displacement demands, and they affect the permanent displacements. This phenomenon appears in both cases of stiff and flexible soil, as well as for both regular and irregular frames. It is found that soil–structure interaction generally leads to lower values of IDR, and maximum horizontal displacement and acceleration in comparison with the case of rigid soil assumptions.