Practical Methodology for Evaluating Mining Front Stability Based on the Diametrical Core Deformation Technique

The state of stress in a mining front constantly changes with mining activities. In a recent study, the authors developed and verified with laboratory measurements an analytical model for the calculation of mining-induced stresses based on measuring the deformations of a diamond drill rock core extracted perpendicular to the mining front or face. The method is called diametrical core deformation technique (DCDT). In this study, the DCDT is used in combination with 3D numerical modelling to develop a practical methodology for the assessment of mining face stability. To demonstrate the methodology, a diamond drill rock core was retrieved from an access drift face 530 m below the surface of an underground mine in northern Quebec. The state of stress in the mining front is estimated from the DCDT and used to adjust the orientation and principal stress magnitudes in the local area around the access drift in a 3D linear-elastic numerical model using an iterative approach. As the rock core is partially fractured due to previous face advance blasting, the numerical model is further adjusted to model the observed damage zone. The 3D model after adjustments is used to examine the mining front stability with the Hoek–Brown failure criterion. It is postulated that the proposed methodology is suitable for the stability assessment of any mining front with or without an observed damage zone.