A Voltage Source Inverter-Based Hybrid Renewable Energy Source for Improving Power Quality

The power demand is quickly rising day by day and however, the available industrial sector needs the demand for power high. Therefore, different loads and different output sources can be employed between supply and demand. This approach intends to assess the current condition need for power quality, without distortion, and Bus interface management with fully integrated PV-based MPPT (Maximum power point tracking) and Wind-based rotor winding induction generator. Solar energy is directly converted into electrical energy using a Photovoltaic (PV) system. The PV cell is the fundamental component of a PV array and can be created by grouping cells and the voltage and current that are accessible at a PV device's contacts. In solar PV, the MPPT technique and boost converter are used to maximize the buck or boost and feed it to the single-phase Pulse Width Modulation (PWM) to the inverter. The rectifier circuit rectifies the AC input source and is connected through the controller; simultaneously, the DC-DC converter converts the DC input and bucks or boosts up the from the input sources. The voltage source inverter is combined with shunt active power filter functionality, which is further used to interface the DC-shunted wind-solar hybrid model to the grid. A voltage source inverter has more efficiency and both different input sources are connected via a DC bus. In this method, both DC and AC output loads are connected, managing the desired output voltage with efficient and better output results, and analyzing the total harmonics distortion method using Mat-lab simulation.