Key points are not available for this paper at this time.
Abstract Bi-directional DC-DC converters (BDC) are required for power flow regulation between storage devices and DC buses in renewable energy based distributed generation systems. The fundamental requirements of the BDC are simple structure, reduced switching components, a wide range of voltage gain, low voltage stress, high efficiency, and reduced size. There are different BDC topologies for various applications based on their requirements in the literature. Various BDC are categorized according to their impedance networks. Isolated BDC converters are large due to high-frequency transformers and hence used for static energy storage applications whereas non-isolated BDC is lightweight and suitable for dynamic applications like electric vehicles. This paper reviews types of non-isolated BDC topologies. The performance of five non-isolated BDC converters under steady state condition is evaluated by using theoretical analysis. On this basis, suitability of BDC for different applications is discussed. Further advantages and limitations of converters are discussed by using comparative analysis. The optimization of BDC for distributed generation systems from the perspectives of wide voltage gain, low electromagnetic interference, low cost with higher efficiency is identified. Theoretical analysis of the converters is validated by simulating 200W converters in MATLAB Simulink.
Nagabushanam et al. (Tue,) studied this question.