Regional differences in stomach stretch during organ filling and their implications on the mechanical stress response

As part of the digestive system, the stomach plays a crucial role in the health and well-being of an organism. It produces acids and performs contractions that initiate the digestive process and begin the break-up of ingested food. Therefore, its mechanical properties are of interest. This study includes a detailed investigation of passive strains in the porcine stomach wall during organ filling. In addition, the observed strains were applied to tissue samples subjected to biaxial tensile tests. The results show inhomogeneous strains during filling, which tend to be higher in the circumferential direction (antrum: 13.2 %, corpus: 22.0 %, fundus: 67.8 %), compared to the longitudinal direction (antrum: 4.8 %, corpus: 24.7 %, fundus: 50.0 %) at a maximum filling of 3500 ml. Consequently, the fundus region experienced the greatest strain. In the biaxial tensile experiments, the corpus region appeared to be the stiffest, reaching nominal stress values above 400 kPa in the circumferential direction, whereas the other regions only reached stress levels of below 50 kPa in both directions for the investigated stretch range studied. Our findings gain new insight into stomach mechanics and provide valuable data for the development and validation of stomach models