A novel impact indentation technique with dynamic calibration method for measurement of dynamic mechanical properties

High strain rates and continuous real-time data acquisition are difficult to balance in existing impact indentation techniques. Meanwhile, the inaccuracy of the testing P-h curves limits the development of quantitative applications for dynamic testing of mechanical properties at micro region. This article develops a momentum exchange impact indentation testing method, which extends the testing range of strain rate to above 105 s−1, and at the same time avoids secondary impact. Impact indentation tests are conducted on single-crystal aluminum specimens with impact velocity from 76.9 to 176 mm/s. Based on calibrated data, the comparison of calculation methods for dynamic hardness is carried out. The dynamic elastic modulus is obtained by means of the Oliver-Pharr method, which increases from 71.9 to 89.4 GPa with increasing impact velocity. A multi-dimensional data analysis method is proposed based on the obtained experimental data to quantitatively study the damping and stiffness characteristics of materials. This testing method is particularly useful for quantitatively obtaining the micro region dynamic mechanical properties of solid materials at high strain rates.