Key points are not available for this paper at this time.
Recent studies in turbomachinery have shown that the phase of acoustic wave reflection within an intake can have either positive or negative effects on the aeroelastic stability of fan rotor blades. However, the typical flow structures, such as the shock wave, within rotor blade passages with acoustic wave reflection remain unclear. The aim of this research was to address this gap by investigating how these flow structures impact blade aeroelastic stabilities with acoustic wave reflections. The focus of this study was the NASA Rotor 67 blade with an extended intake. Moreover, a bump is incorporated on the shroud at different distances from the fan to reflect acoustic waves of varying phases. Utilizing the energy method, variations in the aerodynamic work density on blade surfaces were calculated under different phases of reflected acoustic waves. Analysis indicates that the spatial position of the shock wave undergoes periodic changes synchronized with the phase of acoustic reflection, marking the first instance of such an observation. This synchronization is identified as the primary factor causing variations in the aeroelastic stability of blades due to acoustic wave reflection, contributing to a deeper understanding of the mechanism behind acoustic flutter. The acoustic–vortex coupling at the blade tip leads to unpredictable variations in unsteady pressures on the blade suction surface, although its effect on blade aeroelastic stabilities is relatively limited compared to that of the shock wave.
Yang et al. (Mon,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: