Numerical studies on the performance of Savonius turbines for hydropower application by varying the frontal cross-sectional area

The Savonius turbine is a drag-based device that utilizes hydrokinetic energy in irrigation channels for small-scale hydropower generation. Since it is a drag-type device, the turbine blade frontal cross-sectional area influences the performance of the turbine blade. In this paper, the influence of taper on the turbine blade bottom, top, and middle sides on the Savonius turbine performance was computed numerically using the sliding mesh technique with a 0.5 m/s water inlet velocity. In this study, the effect of various blades with varying cross-sectional areas has been analyzed numerically using the sliding mesh technique, and the results were compared with the semicircular blade profile. The variation of torque coefficient with respect to rotor blade rotation was plotted, and pressure and velocity variation were analyzed to investigate the performance parameters. The results showed that the top small, middle high, and bottom small blade profiles performed better than the semicircular, inverted taper and top high, middle small, and bottom high blade profiles. It is observed that the maximum torque coefficient at a TSR of 0.7 is 0.35, and the maximum power coefficient at a TSR of 0.9 is 0.253.