Key points are not available for this paper at this time.
Designing advanced combustors that operate at high temperatures and produce little pollution, especially in the absence of primary and dilution holes, is a difficult task that may bring significant challenges. In this regard, this paper introduces a Kriging surrogate model approach to optimize the outlet temperature distribution of the combustor to achieve such advanced low-pollution combustors. Building upon previous research, this study explores the effects of the swirler blade installation angle on the outlet temperature distribution of the combustor without primary or dilution holes. Traditional methods, such as the control variable method using computational fluid dynamics (CFD) for numerical simulation, are limited in application due to the complex coupling of flow, heat transfer, mass transfer, and combustion processes. In contrast, surrogate models, especially the Kriging model, offer a rapid and efficient alternative to extensive CFD simulations that provide accurate predictions and error estimates for the solution of the problem. In summary, this paper details the process of generating sample points through three-dimensional numerical simulations, develops a Kriging surrogate model through Latin hypercube sampling, and optimizes the model to identify the most uniform outlet temperature distribution achievable by adjusting the installation angle of the swirl blade. The optimal design parameters, which are quickly obtained through the Kriging model, showed a significant reduction in the overall temperature distribution function and the radial temperature distribution function by 21% and 27.14%, respectively.
Wang et al. (Wed,) studied this question.