Key points are not available for this paper at this time.
This research evaluates Laser Powder Directed Energy Deposition (LP-DED) for producing fine feature internal microchannels. This study is focused on enhancing and characterising the surfaces of microchannels produced using techniques such as abrasive flow machining, chemical milling, chemical mechanical polishing, electrochemical machining, and thermal energy method to modify internal surfaces of microchannels made from NASA HR-1 Fe-Ni-Cr alloy. Flow testing for discharge coefficient measurement is conducted on processed microchannel samples, followed by characterisation through optical microscopy, Scanning Electron Microscopy (SEM), and Computed Tomography. Findings reveal variations in surfaces due to powder adherence, melt pool undulations, and polishing mechanisms. The study emphasises the significance of removing material equivalent to the mean powder diameter to reduce surface roughness and impact the discharge coefficient. The research proposes a ratio for planarising roughness and waviness peak height and density, offering insights for tailored surface adjustments in specific applications requiring reduced flow resistance.
Gradl et al. (Wed,) studied this question.