Key points are not available for this paper at this time.
Thick electrodes with high mass loading and increased content of active materials are critical for achieving higher energy density in contemporary lithium-ion batteries (LIBs). Nonetheless, producing thick electrodes through the commonly used slurry coating technology remains a formidable challenge. In this study, we have addressed this challenge by developing a dry electrode technology by using ultralong multiwalled carbon nanotubes (MWCNT) as a conductive additive and secondary binder. The mixing process of electrode compositions and the fibrillation process of the polytetrafluoroethylene (PTFE) binder were optimized. The resulting LiCoO2 (LCO) electrode exhibited a remarkable mass loading of 48 mg cm–2 and an active material content of 95 wt %. Notably, the thick LCO electrode demonstrated a superior mechanical strength and electrochemical performance. After 100 cycles at a current density of 1/3 C, the electrode still exhibited a capacity retention of 91% of its initial capacity. This dry electrode technology provides a practicable and scalable approach to the powder-to-film LIB electrode manufacturing process.
Wang et al. (Sat,) studied this question.