Effect on combustion performance and emission behavior of diesel engine fueled with hybrid biodiesel produced from a novel ternary oil mixture incorporated with nano additive

Global energy demand has been above 80% fossil fuels for decades, creating a greater and more complicated energy crisis. Biodiesel is a great alternate energy source for future energy demand. Producing biodiesel from a mixture of waste and non-edible oils may be a practical solution to address the growing global need of biodiesel. In this study, hybrid biodiesel is produced from a ternary oil mixture of Waste cooking oil, Ricinus communis oil, and Melia azedarach oil. The hybrid biodiesel blends are prepared by 10% blending (HB10), 20% blending (HB20) and 30% blending (HB30) and 30ppm multiwall carbon nanotube has been added in the blended fuel through sonicating process. At steady 1500rmp and variable load (0–100%), the engine behavior has been examined. The results show that the hybrid biodiesel blend (HB10) with 30ppm MWCNT has shown highest cylinder pressure of 70.9 bar, maximum mean gas temperature 1467.56°C. The engine shows 34.08% rise in net heat release and 9.13% rise in exhaust gas temperature as compare to diesel. The maximum rise in break thermal efficiency of 19.74% and minimum reduction in break specific fuel consumption of 13.79% is noticed in comparison to B00. The highest reduction of HC emission is found as 20.83% for HB20MWCNT30 and 19.34% for HB30MWCNT30 as compare to B00. The inclusion of multiwall carbon nanotube in hybrid biodiesel reduces the HC, CO, NOx and smoke emission and increases CO2 emission as compare to respective hybrid biodiesel blend and diesel. The hybrid biodiesel-diesel blend, with multiwall carbon nanotube can be utilized efficiently in diesel engine with improved overall engine behavior.