Key points are not available for this paper at this time.
Random polypropylene is considered an alternative material to regular polypropylene for applications where improved impact and creep resistance, as well as stiffness, are required. Random polypropylene nanocomposites reinforced with dimethyldichlorosilane-treated silica particles were prepared using meltmixing. The effect of varying the nanoparticles’ content on the structural, mechanical, damping and thermal behavior of the nanocomposites was investigated. The results indicated the improved deformation potential, fracture toughness, and energy storage capacity of the matrix with increasing the filler content. It was observed that the use of high filler fractions limited the reinforcing efficiency of the SiO2 nanoparticles due to the formation of large agglomerates. The nanoparticles’ segregation was initially advised by modeling Young’s modulus but was also confirmed by electron imaging. Examination of the thermal properties of the nanocomposites indicated the limited effect of the nanoparticles on the melting behavior along with the thermal stability of the matrix. These results confirmed the usage of silica nanoparticles as a way of further improving the mechanical and thermomechanical properties of random polypropylene.
Delli et al. (Thu,) studied this question.