Key points are not available for this paper at this time.
Finite element (FE) simulations of adhesively bonded composite joints were conducted using the cohesive zone model (CZM). To clarify the effect of fracture criteria on the accuracy of the CZM simulation, two types of mixed-mode criteria including the linear summation model of Modes I and II energy release rates, GI/GIC+GII/GIIC=1, and the nonlinear power-law, (GI/GIC)n+(GII/GIIC)n=1 , were employed. A CZM formulation using the power-law fracture criterion was developed in this study. The load–displacement curves calculated by the two models were compared with the experimental results obtained from mixed-mode Fernlund–Spelt-type double cantilever beam tests, and the Mode II end-notched flexure (ENF) tests. Calculations using the nonlinear fracture criterion were closer to the experimental results. Consequently, it is concluded that nonlinear fracture modeling is of vital importance for accurate strength analysis of mixed-mode adhesive joints.
Kouno et al. (Tue,) studied this question.